Browsing by Advisor "Maravelakis, Emmanouil"
Now showing items 1-20 of 24
-
Life Cycle Analysis and Sustainability of Photovoltaic Systems – The Case of Greece.
T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
Authors:
Thesis advisor:
Publication Date: 2022-10-04One of the main targets our department, Environmental Engineering and Natural Resources performs is Rational Management of Natural Resources with emphasis at ‘’Sustainable Economy’’ through Multidisciplinary Approaches. This ... -
Development of Vouves olive tree museum.
T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
Authors:
Thesis advisor:
Publication Date: 05-07-2012This thesis deals with the creation of a virtual tour of the Elias Museum in Vouves Apokoronou, Crete. The virtual tour allows the user to make a virtual visit to the musem, like being there, moving in the area, working ... -
Develop training material for AutoCAD in a virtual environment.
T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
Authors:
Thesis advisor:
Publication Date: 17-06-2014The purpose of this thesis is to present the Learning Management System and in particular the program Moodle. Through this thesis will be presented how to install the program Moodle Learning Content Management as it will ... -
Ecodesign strategies.
T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
Authors:
Thesis advisor:
Publication Date: 10-04-2009The basic idea of eco-design lies in the reduction of environmental consequences throughout the whole lifecycle of products, via the improvement of their design. The traditional approach of the environmental protection ... -
Biochar in advanced technological applications.
T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
Authors:
Thesis advisor:
Publication Date: 2022-03-21In the present diploma thesis the search for means and ways for the use of biochar in advanced technological applications was carried out. Nowadays, air, water or environmental pollution is on the rise, so the need for ... -
Geothermal - heating buildings with geothermal.
T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
Authors:
Thesis advisor:
Publication Date: 17-06-2014In this present dissertation we learn about geothermal energy and what is low enthalpy geothermal energy. We learn about heating building with its use and also about some economic-technical data. -
Virtual museum and three-dimension object's modeling.
T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
Authors:
Thesis advisor:
Publication Date: 27-02-2009In this thesis are analyzed the steps and operation of the computational 3d-Som program which refers to the process which must be followed for the 3-d modeling of objects, identical to the original. Furthermore, the ... -
Creation and development of an interactive virtual tour of the city of Chania.
T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
Authors:
Thesis advisor:
Publication Date: 08-09-2010This thesis deals with the design and creation of virtuals tours of the city of Chania. The virtual tour, finding more and more applications is a new technique that gives spherical perspective and third-dimensional view ... -
800 kwp photovoltaic park design laboratory guide with autocad.
T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
Authors:
Thesis advisor:
Publication Date: 2022-10-07Solar energy and renewable energy sources can help in the direction of tackling climate change, but also to manage the growing demand for electricity which is observed worldwide. Especially in Greece, the photovoltaic park ... -
Application of augmented reality on the educational process of "design for environmental engineers".
T.E.I. of Crete, School of Applied Sciences, Department of Electronic Engineering
Authors:
Thesis advisor:
Publication Date: 2022-11-30This thesis is a practical help in the lesson of “Design for Environmental Engineers”. Augmented reality is an emerging technology which, especially in the latest years thrives on different sections such as archaeology, ... -
Study of bioclimatic residence with EcoDesigner software.
T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
Authors:
Thesis advisor:
Publication Date: 06-07-2011With a few simple steps, we can create three-dimensional models to define the use of space in the plans, the floors and to verify our plan and vision with built-in mailing list quantities.The associated maps are available ... -
Study, three dimentional modeling and maquette construction for a bioclimatic house.
T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
Authors:
Thesis advisor:
Publication Date: 08-09-2010The primary target of the current project, titled "Study, three dimentional modeling and maquette construction of a bioclimatic house", was the gathering of information that is required to understand the way a house like ... -
Small wind turbins.
T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
Authors:
Thesis advisor:
Publication Date: 27-03-2014In this thesis we are describing small wind turbines in Greece and islands. -
New technologies of smart hotels.
Η.Μ.U, School of Engineering (ScENG), Electronic Engineering Dept.
Authors:
Thesis advisor:
Publication Date: 2023-03-29The aim of the present dissertation is the familiarization with a ‘smart hotel’. Firstly, the term ‘smart hotel’ is defined and how it can seem useful to people is explained. The needs it caters to and why it is practical ... -
3D house design with fotorealism using sketch up.
T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
Authors:
Thesis advisor:
Publication Date: 24-04-2015This thesis describes in detail the process of the 3d design of a two-floor building with fotorealism with sketch up. -
Design photorealistic performance and evaluation of residential energy upgrade proposals.
T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
Authors:
Thesis advisor:
Publication Date: 2020-10-07The purpose of this dissertation is the review and evaluation of proposals for the energy efficiency upgrade of a holiday residence, which has been drawn in 3D using the Sketch Up software, and that will be later presented ... -
Design and development of an interactive virtual tour of the city of Rethymnon.
T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
Authors:
Thesis advisor:
Publication Date: 14-07-2009This current project deals with the creation of a virtual exploration at the prefecture of Rethimno. This process has been started practicing on a testing level the recent years, and the methods that have been used are ... -
Designing of a building using the ArchiCAD 12 program.
T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
Authors:
Thesis advisor:
Publication Date: 19-11-2010In recent years three-dimensional imaging and visualization have become requirement of each office and company. An architect, engineer, or designer needs to know in general a three-dimensional design program so that he can ... -
Net metering plan design at home.
T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
Authors:
Thesis advisor:
Publication Date: 2020-09-14This dissertation deals with the installation of an interconnected photovoltaic system, 2 0 KW of power based on law in a house in the prefecture of Heraklion. Both the technical study carried out and the financial evaluation ... -
Design study and construction of multi-material extruder for 3D printing.
Η.Μ.U, School of Engineering (ScENG), Electronic Engineering Dept.
Authors:
Thesis advisor:
Publication Date: 2022-04-13The first chapter mentions what 3D printing is and what its history is to date. The technologies of 3D printing are then analyzed. The following are different types of extruders that were studied and helped to implement ...