Browsing by Keywords "μοντελοποίηση"

Now showing items 1-17 of 17

  • Εκπαιδευτικά παραδείγματα ακουστικής μέσω της μεθόδου των πεπερασμένων στοιχείων.

    T.E.I. of Crete, School of Applied Sciences, Department of Music Technology and Acoustics Engineering (in Rethymno)
    Authors: Tsagkarakis, Nikolaos
    Thesis advisor: Kouzoupis, Spyridon
    Publication Date: 05-10-2014
    This thesis presents educational examples mainly on structural acoustics, using theoretical, numerical and experimental methods. Numerical results are obtained through the Finite Element Method in the COMSOL Multiphysics ...

  • Development of a dynamic model for an underwater robot propelled by undulatory fins.

    T.E.I. of Crete, School of Engineering (STEF), IPPS Advanced Manufacturing Systems, Automation and Robotics
    Authors: Chaniotakis, Evangelos
    Thesis advisor: Sfakiotakis, Michail
    Publication Date: 2019-07-25
    In recent years, there is an increased interest in the development of biomimetic Unmanned Underwater Vehicles (UUVs). In this category we can include the robotic prototype SQUIBOTmini that has been developed in the Control ...

  • Development of ana application simulating a virtual museum in a three dimensional environment.

    T.E.I. of Crete, School of Engineering (STEF), Department of Informatics Engineering
    Authors: Mpolonakis, Konstantinos
    Thesis advisor: Malamos, Athanasios
    Publication Date: 19-08-2013
    Goal of this project is to observe step by step the development of an application by using prencipal programming tools such as 3D Studio Max and Unity 3D. The development of this application that is beeing analized in the ...

  • Three dimensional geometric model using surface modeling on CAD software.

    T.E.I. of Crete, School of Engineering (STEF), Department of Mechanical Engineering
    Authors: Nikiforos-Parasyris, Angelos
    Thesis advisor: Petousis, Markos
    Publication Date: 26-03-2012

  • Virtual space and education.

    T.E.I. of Crete, School of Engineering (STEF), Department of Informatics Engineering
    Authors: Damianaki, Konstantina
    Thesis advisor: Malamos, Athanasios
    Publication Date: 26-01-2011
    Over the past few years, new technologies, in the area of telecommunication systems, have achieved significant high data rates and managed to cover remote areas, as well. Today, each house has a direct and quick access to ...

  • Educational ontology for semantic modeling of a learning object.

    H.M.U., School of Engineering (ScENG) MSc in Informatics & Multimedia
    Authors: Skoulataki, Georgia
    Thesis advisor: Papadakis, Nikolaos
    Publication Date: 2022-10-24
    This paper studies ontology creation in distance education. More, the purpose of the paper is to search for methodologies and the process of developing an educational ontology, as well as to understand them through the ...

  • Biomechanics of the human spine

    T.E.I. of Crete, School of Engineering (STEF), Department of Mechanical Engineering
    Authors: Vasilopoulou, Ioanna- Maria
    Thesis advisor: Vaϊris, Achilleas; Petousis, Markos
    Publication Date: 2016-05-23
    The spine is one of the most essential parts of the body of every living organism. The body structure is created with the very help of the spine. So with the way it is constructed allows the movement of the body and helps ...

  • Evolution and basic technical features of the guitar using 3D modeling.

    T.E.I. of Crete, School of Applied Sciences, Department of Music Technology and Acoustics Engineering (in Rethymno)
    Authors: Zouvani, Konstantina
    Thesis advisor: Orfanos, Ioannis; Xenikakis, Dimitrios
    Publication Date: 2019-09-25
    In this thesis, a 3D modeling study is presented in order to present the historical evolution and functional behavior of the guitar. In the first chapter, there is a very brief overview of the historical guitar evolution ...

  • Processing material abstraction and simulations. Turning modeling with API-VB programming in CAD environment.

    T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
    Authors: Fragkakis, Dimitris Emmanouil
    Thesis advisor: Dimitriou, Vasilis
    Publication Date: 18-12-2015
    With visual basic programming in the programming interface of Autodesk inventor, the process of turning has been modeled, parameterized and simulated for 4 different cutting tools and presented the results.

  • Modeling & simulation of fluid flow in ducts.

    T.E.I. of Crete, School of Applied Sciences, Department of Electronic Engineering
    Authors: Malliaris, Alexandros
    Thesis advisor: Dimitriou, Vasileios
    Publication Date: 2021-10-13
    This thesis belongs to one of the most advanced areas of applied mechanics, the computational fluid mechanics. The studies performed deal with the computational fluid flow modeling and simulations using Computational Fluid ...

  • Modeling and analysis of energy consumption for data center space.

    T.E.I. of Crete, School of Engineering (STEF), PPS in Informatics and Multimedia
    Authors: Fantaoutsakis, Ioannis
    Thesis advisor: Panagiotakis, Spyridon
    Publication Date: 2016-08-24
    This work investigates the thermal performance of buildings with emphasis on data center spaces. Power consumption in Data Centers, nowadays, is constantly increasing. Data Centers provide the world community with an ...

  • Modelling and Simulation of Orthogonal CuttingUsing FEM-SPH Numerical Methods.

    Η.Μ.U, School of Engineering (ScENG), Electronic Engineering Dept.
    Authors: Papadakis, Christos
    Thesis advisor: Dimitriou, Vasilis
    Publication Date: 2020-10-26
    This thesis deals with the study of orthogonal cutting material removal techniques using numerical simulations and in particular the Finite Element Method (FEM) and the Smooth Particle Hydrodynamic (SPH) method. After ...

  • Adaptive measuring models.

    T.E.I. of Crete, School of Applied Sciences, Department of Electronic Engineering
    Authors: Tzovaras, Nikolaos
    Thesis advisor: Konstantaras, Antonios
    Publication Date: 25-09-2014
    Modelling of magnetic field time series and recognition of them from external noise and other noise types with adaptive stochastic models.

  • The R book: statistical modelling.

    T.E.I. of Crete, School of Applied Sciences, Department of Electronic Engineering
    Authors: Bitzinis, Ioannis
    Thesis advisor: Androulakis, Georgios
    Publication Date: 19-08-2013
    This thesis is introducing users to the assumptions that lie behing the tests fostering a critical approach to statistical modelling, but involving little statistical theory and no backround in mathematics or statistics.

  • Mold desing and manufacturing of a windturbine blade using modern CAD/CAM-CAE computational methods and processes.

    T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
    Authors: Papadoulis, Theodoros
    Thesis advisor: Dimitriou, Vasileios
    Publication Date: 08-04-2011
    Mold design and manufacturing of a wind turbine blade using CAD for modeling and CAM for the numerical control of the CNC machine (CAE).

  • Three dimension wind generator flap design, using 3D scanning digitalization techniques.

    T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
    Authors: Chatzicharalampidis, Alexandros
    Thesis advisor: Antoniadis, Aristomenis
    Publication Date: 28-08-2008
    Through new technologies and more concretely with 3D Scanning method, three-dimensional digital photographs of any object and process can be obtained in such way, that finally are produced items identical with the prototype.

  • Computational numerical control of a CNC machine.

    T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
    Authors: Zografos, Petros
    Thesis advisor: Dimitriou, Vasileios
    Publication Date: 08-04-2011
    This thesis presents the investigation of operating and programming a modern CNC machine for the optimization of the numerical control in manufacturing dealing with material removal. The CNC machine used is the VF1 of the ...