Browsing by Keywords "συντήρηση"

Now showing items 1-18 of 18

  • Telemetry system for machinery predictive maintenance.

    T.E.I. of Crete, School of Engineering (STEF), Department of Mechanical Engineering
    Authors: Pratsinakis, Emmanouil
    Thesis advisor: Christakis, Dimitrios
    Publication Date: 2018-10-04
    This thesis consists of two main parts: 1) remote management, storage, and processing of data 2) analyzing the results and make conclusions from the measurements taken On site of the machine location that will be ...

  • Functional restoration and preparation for calibration of a laboratory gasoline engine.

    Η.Μ.U, School of Engineering (ScENG), Mechanical Engineering Dept
    Authors: Tzortzis, Michail-Sifis
    Thesis advisor: Tzirakis, Evangelos
    Publication Date: 2023-07-24
    This thesis aims to showcase the reconstruction, restoration, maintenance and the proper functioning of a lab internal combustion engine attached to a hydraulic dynamometer. It also aims to demonstrate its orderly functioning ...

  • Design and parameter analysis of natural gas transport stations in Greece.

    T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
    Authors: Deste, Aikaterini; Apokremioti, Kalliopi
    Thesis advisor: Karapidakis, Emmanouil
    Publication Date: 10-04-2009
    Natural gas is consisted of a gas hydrocarbons mixture which is extracted from the underground concavities under high pressure and is transferred towards the places that it is going to be used by, without any further ...

  • Installation and maintenance of the hydraulic lift.

    T.E.I. of Crete, School of Engineering (STEF), Department of Mechanical Engineering
    Authors: Mylonopoulos, Ioannis
    Thesis advisor: Sifakaki, Krystallia
    Publication Date: 14-01-2015
    This diploma presents the steps of installation and maintenance of the hydraulic lift according current legislation.

  • Maintenance manual for agricultural machinery.

    T.E.I. of Crete, School of Engineering (STEF), Department of Mechanical Engineering
    Authors: Stavrakis, Michalis
    Thesis advisor: Petousis, Markos
    Publication Date: 15-07-2014
    In the past, during the facility design phases, it was uncommon to devote substantial resources to life-cycle and maintenance of equipment. However, today manufactures pay lot of attention to the maintenance and proper ...

  • Construction and maintenance of high voltage power transformers.

    T.E.I. of Crete, School of Applied Sciences, Department of Electronic Engineering
    Authors: Vlachos, Stamatios
    Publication Date: 10-04-2009
    The main purpose of this research is to gather in one paper information about construction and maintenance of high voltage power transformers. There is included information about condition monitoring techniques, maintenance ...

  • Sulzer engine maintenance cost of DEH Linoperamaton of Heraklion.

    Η.Μ.U, School of Engineering (ScENG), Mechanical Engineering Dept
    Authors: Pedos, Argyrios
    Thesis advisor: Christakis, Dimitrios
    Publication Date: 2023-06-26
    This thesis deals with the costs of maintenance of the Sulzer engines and specifically the RTAF58. To be more specific, in the first chapter of the present thesis, there will be a brief historical review of the development ...

  • Operation and maintenance of wind parks in Crete.

    T.E.I. of Crete, School of Engineering (STEF), Energy and Environmental Technology EUP
    Authors: Tamiolakis, Ioannis
    Thesis advisor: Katsaprakakis, Dimitrios
    Publication Date: 29-02-2008

  • Methods of equipment and maintenance in the Petroleum industry. The case of Hellenic Petroleum

    T.E.I. of Crete, School of Engineering (STEF), Department of Mechanical Engineering
    Authors: Theodorakis, Vasileios
    Thesis advisor: Vairis, Achilleas
    Publication Date: 06-02-2013

  • Distribution transformers and maintenance.

    T.E.I. of Crete, School of Applied Sciences, Department of Electronic Engineering
    Authors: Kalogerakis, Stylianos
    Publication Date: 10-04-2009
    The main purpose of this research is to gather in one paper information about distribution transformers and maintenance practices. Information about fist transformers ,General Transformer Design Dry-type and cast resin, ...

  • The quality control in aircraft maintenance.

    H.M.U., MSc in MBA for Engineers
    Authors: Tzimas, Georgios
    Thesis advisor: Markaki, Maria
    Publication Date: 2020-06-12
    Over the years, quality standards have been established in companies in order to produce goods and services. These standards have helped and continue to help companies to create an advantage and, of course profit. Any form ...

  • Modern maintenance methods, optimal selection criteria and application to wind turbines.

    H.M.U., School of Engineering (ScENG) MSc in Energy Systems
    Authors: Deverakis, Stavros
    Thesis advisor: Siderakis, Kyriakos
    Publication Date: 2023-07-20
    Maintenance is a key business element to improve competitiveness and optimize the operation of industries. This thesis presents the equipment maintenance methodologies used in industry and in energy systems. The methods ...

  • Wind power park maintenance and wind turbine Nordex42.

    T.E.I. of Crete, School of Engineering (STEF), Department of Mechanical Engineering
    Authors: Gonianakis, Georgios
    Thesis advisor: Kontaxakis, Konstantinos
    Publication Date: 2018-01-08
    The wind park is an array of wind turbines. The parks are divided into land and offshore. Types of wind turbines are classified primarily according to the orientation of their axes in relation to the wind flow. Horizontal ...

  • Design, development and organizing of a standard cnc machinery hall in TEI of Crete.

    T.E.I. of Crete, School of Engineering (STEF), Department of Mechanical Engineering
    Authors: Metallas, Eleftherios
    Thesis advisor: Vidakis, Nektarios; Petousis, Markos
    Publication Date: 22-02-2011

  • Vehicle air-conditioning system, fluid air conditioner, development and replacement of the refrigerants.

    T.E.I. of Crete, School of Engineering (STEF), Department of Mechanical Engineering
    Authors: Agiasmatis, Michail
    Thesis advisor: Koudoumas, Georgios
    Publication Date: 2016-07-04
    The theme of the specific thesis is a very important and interesting part of Mechanical Engineering. It is one of the major factors in the construction sector that has a great development for engineers over the years.More ...

  • Technical description of opereation, maintenance and cooling of pumps and calculation of centrifugal pump characteristics.

    Η.Μ.U, School of Engineering (ScENG), Mechanical Engineering Dept
    Authors: Sellinas, Dionysios
    Thesis advisor: Katsaprakakis, Dimitrios
    Publication Date: 2023-09-18
    This thesis is intended to describe centrifugal pumps, define their technical characteristics and mention the most basic laws of fluid mechanics. The methods of predictive pump maintenance are also presented and analyzed ...

  • Vehicle service software developement, and spare parts management for workshops using Microsoft Access.

    T.E.I. of Crete, School of Applied Sciences, Department of Electronic Engineering
    Authors: Giannakis, Panagiotis
    Publication Date: 29-02-2008
    The present work is an application based on databases. In Microsoft Access 2003 an application of organising information of spare parts for car service stations is presented while incorporating a complete customer list. ...

  • Surgery tools per speciality

    T.E.I. of Crete, School of Engineering (STEF), Medical Systems Technology EUP
    Authors: Kokkini, Eleftheria
    Publication Date: 29-02-2008
    This literature study provides a broad overview of surgical tools that used in every surgergical speciality. It provides a brief history and an explicity presentation of surgical tools as well as a description of their ...