Browsing by Keywords "σχεδίαση με τη βοήθεια υπολογιστή (CAD)"
Now showing items 1-14 of 14
-
Three dimensional geometric model using surface modeling on CAD software.
T.E.I. of Crete, School of Engineering (STEF), Department of Mechanical Engineering
Authors:
Thesis advisor:
Publication Date: 26-03-2012 -
Three-dimensional geometric modeling tools in TEI of Crete.
T.E.I. of Crete, School of Engineering (STEF), Department of Mechanical Engineering
Authors:
Thesis advisor:
Publication Date: 08-10-2008 -
Geometry verification of 3D printed wings with reverse engineering technique.
T.E.I. of Crete, School of Engineering (STEF), Department of Mechanical Engineering
Authors:
Thesis advisor:
Publication Date: 2017-10-16Within this project the aim was to verify the geometry of 3D printed and CNC manufactured wings of wind generator machine though reversed engineering methods. The technology which used was a reversed engineering camera and ... -
Design and manufacture of a prosthetic forearm.
T.E.I. of Crete, School of Engineering (STEF), Department of Mechanical Engineering
Authors:
Thesis advisor:
Publication Date: 2018-07-10The subject of this thesis is the design and manufacture of a prosthetic forearm which, along with an existing robotic hand, it constitutes a complete artificial upper limb. At first, it has been an introduction to the ... -
Study, design and construction of a mold cavity for speargun
T.E.I. of Crete, School of Engineering (STEF), Department of Mechanical Engineering
Authors:
Thesis advisor:
Publication Date: 24-02-2015In this thesis the reader can learn about mold making through the PTC Creo 2.0 software and in particular making a mold cavity for a carbon speargun handle for both a right and left handed people. In this theses the reader ... -
Mold assembly and modeling of a vertical shaft wind-turbine.
T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
Authors:
Thesis advisor:
Publication Date: 24-04-2013This thesis is the first part of a manufacturing project focusing to the construction of a vertical axis wind turbine (V.A.W.T), aiming to the use in urban environment. Specifically the project is focused in the choice, ... -
Conventional car modeling and preliminary analysis of converting it to a car, friendly for the environment.
T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
Authors:
Thesis advisor:
Publication Date: 28-01-2010In this thesis an application of software packages Geomagic Studio, Point Cloud, AutoCAD and Autodesk Inventor is presented concerning the formulation of the surface model of a car. Afterwards, a preliminary analysis takes ... -
Designing and planning a pulley with SolidWorks.
T.E.I. of Crete, School of Engineering (STEF), Department of Mechanical Engineering
Authors:
Thesis advisor:
Publication Date: 20-09-2010 -
Simulation of a mechanism's kinematic characteristics with CAD software.
T.E.I. of Crete, School of Engineering (STEF), Department of Mechanical Engineering
Authors:
Thesis advisor:
Publication Date: 30-11-2010 -
Finite element modeling simulation of the acoustic behaviour and characteristics of a drum.
T.E.I. of Crete, School of Applied Sciences, Department of Music Technology and Acoustics Engineering (in Rethymno)
Authors:
Thesis advisor:
Publication Date: 12-12-2013In this thesis the acoustic behavior and characteristics of a drum is studied by the help of the Finite Element Method. The first chapter gives a brief description of percussion instruments and a reference of the importance ... -
3D house design with fotorealism using sketch up.
T.E.I. of Crete, School of Applied Sciences, Department of Environmental and Natural Resources Engineering
Authors:
Thesis advisor:
Publication Date: 24-04-2015This thesis describes in detail the process of the 3d design of a two-floor building with fotorealism with sketch up. -
Design and construction of anthropomorphic metal robotic hand.
T.E.I. of Crete, School of Engineering (STEF), Department of Mechanical Engineering
Authors:
Thesis advisor:
Publication Date: 2017-03-09This thesis concerns the design and the development of an anthropomorphic robotic hand that was manufactured at the Control Systems & Robotics Laboratory of the Technological Educational Institute of Crete. The robotic ... -
Design and construction of humanoid robotic hand.
T.E.I. of Crete, School of Engineering (STEF), Department of Mechanical Engineering
Authors:
Thesis advisor:
Publication Date: 01-11-2012 -
Design, study and costruction of mold cavity for RC propeller.
T.E.I. of Crete, School of Engineering (STEF), Department of Mechanical Engineering
Authors:
Thesis advisor:
Publication Date: 2017-07-20First with the aerodynamic program Java prop I construct an aerodynamic study, dimension of the propeller, airfoil and pitch. Then I design the propeller in PTC Creo and the mold cavity . The construction of t he mold in ...